Vacuum Sheet Lifter

Three types to be designed as per your actual needs pneumatic type, electric type or battery type. For 500kg or below, we apply with pneumatic type, which apply with pure pneumatic system, no need to connect electricity, no charge, pneumatic lifting and pneumatic adsorption. For 500KG or above, we apply the electric type which is more safe and durable use.

Our laser machine company provides customized size and lifting solutions, the pads quantity and size and vacuum pads position, etc. details according to your actual use. The sucker position can be adjusted to meet size changes of different plates.

For some sheets with oil or uneven surface especially for thin metal plates our sucker device with special ball head design which can adsorb the material in uneven conditions. And if the material is with oil, actually it is better for our rubber to have better air tightness.

Folk jobs also available.

Adopting German Becker large flow vacuum pump with extremely large flow and strong suction, which is safe and can use for a long time.

For the battery type, we choose Panosonic, normally one pc can use 1-2 days, and the other one can charge which this one use.

The vacuum pads we adopt high strength wear resistant acrylonitrile-butadiene rubber which with longer quality guarante period for 18 months. And detachable suction cup rubber design, easy to replace environmentally friendly.

The suction device is made of cast aluminum with one time high pressure die casting molding by experienced workers, which is lightweight, high strength.

We equiped with check valve and large capacity accumulator when in the accidental power failure, the workpiece can still remain in the sucker position for 5-30 minutes for your handling.

Vacuum leak alarm system, which can ensure that the equipment works safely above the standard vacuum.

Special ball head design for our vacuum cups which can adsorb the material in uneven condition. And if the material with oil, actually it is better for our rubber have better air tightness.

For Vacuum Pads design, Normally we use pads with 2 sizes, one is Diameters 300mm, one is diameter 230mm, diameter 300mm can load 200kgs/pcs, and Diameters 230mm can load 100kgs, if the weight is 1000kgs, so we need at least 5 pcs of the diameters of 300mm, normally will use 6pcs. For each device, we will consider some extra capacity to make sure the safety to use.